Formation of Cellulose Nanofibers from Cellulose Diacetate via Electrospinning

Abdushkur  Sarymsakov; Nurbek Ashurov; Akobirkhon Shukurov; Zilola Nazarova

Abdushkur Sarymsakov Institute of Polymer Chemistry and Physics, Academy of Sciences, Tashkent, Uzbekistan
Nurbek Ashurov Institute of Polymer Chemistry and Physics, Academy of Sciences, Tashkent, Uzbekistan
Akobirkhon Shukurov Institute of Polymer Chemistry and Physics, Academy of Sciences, Tashkent, Uzbekistan
Zilola Nazarova Institute of Polymer Chemistry and Physics, Academy of Sciences, Tashkent, Uzbekistan

Keywords: Electrospinning, Nanofibers, Cellulose Diacetate, Cellulose II, IR spectroscopy, X-ray diffraction analysis

Abstract

The study explores the production of nanofibers from cellulose diacetate (CDA) dissolved in acetone-water mixtures via electrospinning, with acetone-to-water ratios of 95:5, 92.5:7.5, and 90:10. It demonstrates the saponification of CDA nanofibers in potassium hydroxide to obtain cellulose II nanofibers, analyzed using IR spectroscopy and X-ray diffraction. Optimal conditions for electrospinning were identified with a 10% CDA solution in acetone containing 10% water, producing uniform nanofibers with diameters of 90–550 nm. Alkaline hydrolysis of CDA nanofibers yielded cellulose II nanofibers with an average diameter of 350–400 nm and improved crystallinity. These cellulose II nanofibers, with high swelling capacity and potential for applications in air filters and biodegradable medical materials, were characterized by their large surface area and mechanical properties. The findings offer insights into the processing parameters and potential uses of cellulose nanofibers, filling a knowledge gap in the efficient production and application of biodegradable nanomaterials.

References

El-Aswar, E.I.; Ramadan, H.; Elkik, H.; Taha, A.G. A comprehensive review on preparation, functionalization and recent applications of nanofiber membranes in wastewater treatment. J. Environ. Manage. 2022, 301, 113908.

Zhang, Y.; Zhang, C.; Wang, Y. Recent progress in cellulose-based electrospun nanofibers as multifunctional materials. Nanoscale Adv. 2021, 3, 6040–6047.

Wsoo, M.A.; Shahir, S.; Mohd Bohari, S.P.; Nayan, N.H.M.; Razak, S.I.A. A review on the properties of electrospun cellulose acetate and its application in drug delivery systems: A new perspective. Carbohydr. Res. 2020, 491, 107978.

X. Y. Wang, C. Drew, S. H. Lee, K. J. Senecal, J. Kumar,and L. A. Sarnuelson, Nano Lett., 2, 173 (2002).

H. Q. Liu and Y. L. Hsieh, J. Polym. Sci., Part B: Polym.Phys., 40, 2119 (2002).

W. K. Son, J. H. Youk, T. S. Lee, and W. H. Park, J. Polym.Sci., Part B: Polym. Phys., 42, 5 (2004).

J. J. Blaker, N. A. H. M. L. Bismarck, and A. Bismarck, “Tailoring mechanical properties of electrospun nanofibre scaffolds by co-spinning with sacrificial fibres,” J. Polym. Sci. B Polym. Phys., vol. 45, no. 22, pp. 3240–3247, 2007.

D. Li and Y. Xia, “Electrospinning of nanofibers: Reinventing the wheel?,” Adv. Mater., vol. 16, no. 14, pp. 1151–1170, 2004.

N. Bhardwaj and S. C. Kundu, “Electrospinning: A fascinating fiber fabrication technique,” Biotechnol. Adv., vol. 28, no. 3, pp. 325–347, 2010.

M. S. Onses et al., “Block copolymer assembly into nanostructured materials,” Nat. Mater., vol. 13, no. 6, pp. 519–528, 2014.

S. K. Samal, M. Mohanty, and S. K. Nayak, “Polypropylene-nanoclay nanocomposites: Effect of compatibilizer on mechanical, thermal and morphological performance,” J. Appl. Polym. Sci., vol. 117, no. 1, pp. 245–256, 2010.

H. Kaur and H. B. Bohidar, “Synergistic effect of cationic surfactant on aggregation and gelation of polyacrylamide chains,” Polym. J., vol. 39, no. 3, pp. 337–344, 2007.

T. S. Anirudhan and P. S. Suchithra, “Polyacrylamide-grafted nanocellulose/poly(acrylic acid) composite for the adsorptive removal of uranium(VI) from aqueous solutions,” Cellulose, vol. 15, no. 2, pp. 247–259, 2008.

L. Feng, Y. Li, and J. Yang, “Electrospinning of cellulose acetate in acetone, N,N-dimethylacetamide, and their mixtures,” J. Polym. Sci. B Polym. Phys., vol. 44, no. 17, pp. 3213–3223, 2006.

S. Chakrabarty and I. C. Escobar, “Electrospun poly(vinylidene fluoride)/cellulose acetate phthalate bi-layered membranes for bioseparations,” J. Appl. Polym. Sci., vol. 108, no. 5, pp. 2896–2904, 2008.